• Allen-Bradley
  • Honeywell
  • Masoneilan
  • Rosemount
  • Siemens
  • Yokogawa
Support

sales@everest-instruments.com

Worldwide

Shipping

Menu
Categories
  • Building Technologies
  • Clearance
  • Connectivity
  • Controller
  • DCS System
  • Electronics Components
  • Field Instruments
  • Filter Regulator
  • Gas Chromatograph
  • Gas Detector
  • HMI
  • Industrial Components
  • Inverters
  • Measurement
  • Motors
  • PLC
  • Pneumatics, Hydraulics
  • Positioners
  • Pressure Regulator
  • Process Analyzer
  • Products For Protection
  • Programmable Logic Controllers
  • Pump/Parts
  • Safety Barrier & Isolator
  • Sensors
  • Servo Motors & Drives
  • Switches
  • Transducer
  • Transmitters
  • Uncategorized
  • Valves
  • Vibration Monitoring
  • Home
  • Shop
  • Brands
  • Get a quote
Get a quote
GE - Masoneilan
Home PLC GE Fanuc IC687BEM744
GE - Masoneilan
GE IC697CHS770 Contact us for prices
Back to products
GE - Masoneilan
GE Fanuc IC687BEM713 Contact us for prices
GE

GE Fanuc IC687BEM744

Contact us for prices

SKU: E12888-2

GE Part no.  IC687BEM744

GE Fanuc IC687BEM744 is a FIP bus controller, specially designed for the IC967 series PLC manufactured by GE Fanuc. It is one of four compatible FIP bus controllers and is a half-slot module. Because the module’s architecture has half-angle panels, it is very suitable for installation in an integrated rack. The half-slot module is functionally the same as the full-slot FBC. IC687BEM744 should be used with 2.5MHz WorldFIP network. Like the other four FIP bus controllers, IC687BEM744 supports TCP/IP communication in addition to general messaging compatibility and support. Please note that the FIP bus controller (such as IC687BEM744) cannot be installed in the PLC extension rack of the 90-70 PLC system. However, a single 90-70 PLC system can support up to four FIP bus controllers.

The IC687BEM744 is equipped with 6 LED’s to indicate status, a 15-pin serial connector RS-485 port, two 9-pin FIP Fieldbus connector channels, and a restart button. The 6 LED’s represent the following, from top to bottom: Module OK, Bus Arbiter, Carrier Detect Ch. 1, Transmit Enable Ch. 1, Carrier Detect Ch. 2, and Transmit Enable Ch. 2. The RS-485 port is used to easily connect your PC to the module for upgrading firmware. The restart button allows the user to restart the module or to reload software while simultaneously restarting the module. The two FIP Bus Connectors allows the IC687BEM744 to support redundant bus capabilities. It is important to never install or remove the module when power is applied to the system.

Delivery: 2-4 weeks

 

19 People watching this product now!
SKU: E12888-2 Category: PLC
  • Description
  • Additional information
  • Legal Disclaimer
  • GE IC697CPX935
Description

Description

SKU: E12888-2

GE Part no.  IC687BEM744

GE Fanuc IC687BEM744 is a FIP bus controller, specially designed for the IC967 series PLC manufactured by GE Fanuc. It is one of four compatible FIP bus controllers and is a half-slot module. Because the module’s architecture has half-angle panels, it is very suitable for installation in an integrated rack. The half-slot module is functionally the same as the full-slot FBC. IC687BEM744 should be used with 2.5MHz WorldFIP network. Like the other four FIP bus controllers, IC687BEM744 supports TCP/IP communication in addition to general messaging compatibility and support. Please note that the FIP bus controller (such as IC687BEM744) cannot be installed in the PLC extension rack of the 90-70 PLC system. However, a single 90-70 PLC system can support up to four FIP bus controllers.

The IC687BEM744 is equipped with 6 LED’s to indicate status, a 15-pin serial connector RS-485 port, two 9-pin FIP Fieldbus connector channels, and a restart button. The 6 LED’s represent the following, from top to bottom: Module OK, Bus Arbiter, Carrier Detect Ch. 1, Transmit Enable Ch. 1, Carrier Detect Ch. 2, and Transmit Enable Ch. 2. The RS-485 port is used to easily connect your PC to the module for upgrading firmware. The restart button allows the user to restart the module or to reload software while simultaneously restarting the module. The two FIP Bus Connectors allows the IC687BEM744 to support redundant bus capabilities. It is important to never install or remove the module when power is applied to the system.

Legal Disclaimer

Everest-Instruments is not an authorized dealer, agent or associate of any of the designers, brands, or manufacturers, the products of which are offered for sale on https://www.everest-instruments.com/ All trademarks, brand names, and logos mentioned are used for identification purposes only and are registered trademarks of their respective owners who reserve the right of ownership. The use of trademark, brand name or product on our website is not intended to suggest that the company, trademark or brand is affiliated to or endorses our website. All items are 100% authentic and legally purchased from authorized sources.

Additional information

Additional information

Brand

GE

Legal Disclaimer
Legal DisclaimerEverest-Instruments is not an authorized dealer, agent or associate of any of the designers, brands, or manufacturers, the products of which are offered for sale on https://www.everest-instruments.com/ All trademarks, brand names, and logos mentioned are used for identification purposes only and are registered trademarks of their respective owners who reserve the right of ownership. The use of trademark, brand name or product on our website is not intended to suggest that the company, trademark or brand is affiliated to or endorses our website. All items are 100% authentic and legally purchased from authorized sources.E-mail: sales@everest-instruments.com
GE IC697CPX935

Shop by brand

York International
Yokogawa
Teledyne Gas & Flame Detection
Sundyne
SPXFLOW
Simtronics
Siemens
Schneider Electric
Rotork
Rosemount
Rockwell Automation
Robertshaw Controls Company
Phoenix Contact
Philips
Panasonic
Mitsubishi Electric
Micro Motion
Merkur
MASONEILAN USA
ICS Triplex
Honeywell
HIMA
Harloff
Go Regulator / CIRCOR ENERGY
GE Multilin
GE Fanuc
GE Druck
GE
Fisher-Rosemount
Fisher Controls
FANUC
Endress+Hauser
Emerson
Eaton
Dresser
DETCON
DeltaV
Danfoss
Cutler Hammer
Crowcon
Consolidated
Circle Seal
Cameron
Bently Nevada
Baker Hughes
Azbil
Atlas Copco
AMRAD ENGINEERING
Allen-Bradley
AEG
ABB

Legal Disclaimer

Everest-Instruments is not an authorized dealer, agent or associate of any of the designers, brands, or manufacturers, the products of which are offered for sale on https://www.everest-instruments.com/ All trademarks, brand names, and logos mentioned are used for identification purposes only and are registered trademarks of their respective owners who reserve the right of ownership. The use of trademark, brand name or product on our website is not intended to suggest that the company, trademark or brand is affiliated to or endorses our website. All items are 100% authentic and legally purchased from authorized sources.

1 (450) 732-1128

sales@everest-instruments.com

Menu

    • Home
    • Shop
    • Get a quote
    • FAQs
    • Blog

Support

    • General disclaimer
    • Legal disclaimer
    • Privacy policy
    • Terms and conditions
    • Contact us
Everest-instruments.com 2024
payments
  • Menu
  • Categories
  • Building Technologies
  • Clearance
  • Connectivity
  • Controller
  • DCS System
  • Electronics Components
  • Field Instruments
  • Filter Regulator
  • Gas Chromatograph
  • Gas Detector
  • HMI
  • Industrial Components
  • Inverters
  • Measurement
  • Motors
  • PLC
  • Pneumatics, Hydraulics
  • Positioners
  • Pressure Regulator
  • Process Analyzer
  • Products For Protection
  • Programmable Logic Controllers
  • Pump/Parts
  • Safety Barrier & Isolator
  • Sensors
  • Servo Motors & Drives
  • Switches
  • Transducer
  • Transmitters
  • Uncategorized
  • Valves
  • Vibration Monitoring
  • Home
  • Shop
  • Brands
  • Get a quote