Yokogawa No. FLXA202-D-C-D-CB-D1-NN-A-N-LA-N-NN/U

Yokogawa 2-Wire Dual Channel Transmitter/Analyzer.

FLEXA™ series analyzers are modular designed analyzers for continuous online measurement in industrial installations. They provide single sensor or dual sensor measurement, making it the most flexible 2-wire analyzer. With FLXA202, multiple analyzers are not required, because by replacing the internal measurement module with the required module, it can be easily expanded on-site, which provides you with greater flexibility and optimizes operating expenses.

The post Yokogawa No. FLXA402-D-B-AB-C5-NN-A2-WR-N-N-N-NN/PM appeared first on Everest Instruments Store.

Yokogawa No. SC4A-S-PR-NN-002-10-T1

Yokogawa SC4A sensor

Yokogawa SC4A sensor, available in stainless steel or titanium Version with fixed cable or Variopin connector, used in combination With WU10/WE10 cable for low conductivity application. The design of these sensors is very convenient Compact, can be inserted directly into the process pipeline Use available accessories or adapters. There are several ways to install Possibility, including a compression gland, to provide a simple and effective The method of inserting directly into the process pipeline. The sensor is Made of a combination of FDA-approved wetted materials. This makes them ideal for monitoring pure water System for preparing injection solution.

Features
• Compact style sensor
• Built-in temperature resistor: Pt1000
• Fast temperature response
• Plug and cable form a water tight connection to IP67
• Selection of two cell constant 0.02 cm-1 or 0.10 cm-1
• Sensor with 8 pin Variopin with ID chip for SENCOM SA11-C1 use
• Certified for hazardous area
• Direct process insertion
• Wide range of mountings
• Compatible with PR10 retractable assembly
• The sensor is polished to meet pharmaceutical requirements
• Standard quality inspection certificate with delivery of sensor
• Peek and O-rings according to FDA standard.

The post Yokogawa SC4A-S-PR-NN-002-10-T1 appeared first on Everest Instruments Store.

Yokogawa No. PK200-A73/FF1

Yokogawa PK200 Current-To-Pneumatic Converter

The Yokogawa Model PK200 Current-to-Pneumatic Converter is used mostly to actuate diaphragm operated valves, air cylinder operated valves, power cylinders or other terminal elements. Beside these, it is used as a simple signal converter in hybrid instrumentation comprising electronic and pneumatic instruments.

• High Accuracy and High Reliability.
• High Air Delivery, Low Air Consumption.
• Minimum Effects from Process Environments.
• Electronic Feedback Control.

Input Signal:
4 to 20 mA or 10 to 50 mA.
(As for split ranging, consult Yokogawa.)
Input Resistance:
PK200 is not a constant resistor

Auto/Manual (A/M) Transfer Switch:
Mounted on front of housing, in manual mode,
output signal varied by adjusting the external supply pressure regulator. It can be chosen as option.
Zero Adjustment:
Continuously adjustable, externally set.
Adjustable range; Approximate ±10% of span.
Span Adjustment:
Continuously adjustable.
Adjustable range; Approximate 100 to 125% of span.
(Up to 90% of supply pressure)
Air Consumption:
Max. 4 Nl/min. or 0.24 Nm3/hr at 140 kPa (20 psi) air supply pressure.
Output Air Capacity:
Max. 110 Nl/min. or 6.6 Nm3/hr at 140 kPa (20 psi) air supply pressure.
Operating Temperature Limits:
(Optional features or approval codes may affect
limits)
–40 to 80°C (–40 to 176°F)
Storage Temperature Limits:
–40 to 80°C (–40 to 176°F)
Humidity limits:
5 to 100%/RH

The post Yokogawa No. PK200-A73/FF1 appeared first on Everest Instruments Store.

Yokogawa No. PK200-A83/FF1/SS

Yokogawa PK200 Current-To-Pneumatic Converter

The Yokogawa Model PK200 Current-to-Pneumatic Converter is used mostly to actuate diaphragm operated valves, air cylinder operated valves, power cylinders or other terminal elements. Beside these, it is used as a simple signal converter in hybrid instrumentation comprising electronic and pneumatic instruments.

• High Accuracy and High Reliability.
• High Air Delivery, Low Air Consumption.
• Minimum Effects from Process Environments.
• Electronic Feedback Control.

Input Signal:
4 to 20 mA or 10 to 50 mA.
(As for split ranging, consult Yokogawa.)
Input Resistance:
PK200 is not a constant resistor

Auto/Manual (A/M) Transfer Switch:
Mounted on front of housing, in manual mode,
output signal varied by adjusting the external supply pressure regulator. It can be chosen as option.
Zero Adjustment:
Continuously adjustable, externally set.
Adjustable range; Approximate ±10% of span.
Span Adjustment:
Continuously adjustable.
Adjustable range; Approximate 100 to 125% of span.
(Up to 90% of supply pressure)
Air Consumption:
Max. 4 Nl/min. or 0.24 Nm3/hr at 140 kPa (20 psi) air supply pressure.
Output Air Capacity:
Max. 110 Nl/min. or 6.6 Nm3/hr at 140 kPa (20 psi) air supply pressure.
Operating Temperature Limits:
(Optional features or approval codes may affect
limits)
–40 to 80°C (–40 to 176°F)
Storage Temperature Limits:
–40 to 80°C (–40 to 176°F)
Humidity limits:
5 to 100%/RH

The post Yokogawa No. PK200-A83/FF1/SS appeared first on Everest Instruments Store.

Yokogawa No. PK200-A33

Yokogawa PK200 Current-To-Pneumatic Converter

The Yokogawa Model PK200 Current-to-Pneumatic Converter is used mostly to actuate diaphragm operated valves, air cylinder operated valves, power cylinders or other terminal elements. Beside these, it is used as a simple signal converter in hybrid instrumentation comprising electronic and pneumatic instruments.

• High Accuracy and High Reliability.
• High Air Delivery, Low Air Consumption.
• Minimum Effects from Process Environments.
• Electronic Feedback Control.

Input Signal:
4 to 20 mA or 10 to 50 mA.
(As for split ranging, consult Yokogawa.)
Input Resistance:
PK200 is not a constant resistor

Auto/Manual (A/M) Transfer Switch:
Mounted on front of housing, in manual mode,
output signal varied by adjusting the external supply pressure regulator. It can be chosen as option.
Zero Adjustment:
Continuously adjustable, externally set.
Adjustable range; Approximate ±10% of span.
Span Adjustment:
Continuously adjustable.
Adjustable range; Approximate 100 to 125% of span.
(Up to 90% of supply pressure)
Air Consumption:
Max. 4 Nl/min. or 0.24 Nm3/hr at 140 kPa (20 psi) air supply pressure.
Output Air Capacity:
Max. 110 Nl/min. or 6.6 Nm3/hr at 140 kPa (20 psi) air supply pressure.
Operating Temperature Limits:
(Optional features or approval codes may affect
limits)
–40 to 80°C (–40 to 176°F)
Storage Temperature Limits:
–40 to 80°C (–40 to 176°F)
Humidity limits:
5 to 100%/RH

The post Yokogawa No. PK200-A33 appeared first on Everest Instruments Store.

Yokogawa No. YS1700-100/A34

Yokogawa | pH and Redox (ORP) analyzer

The Yokogawa YS1700 programmable indicating controller can be customized for various applications by running user programs, and has high reliability due to Yokogawa’s proprietary technology, user-friendliness and scalability. The standard model is smaller and lighter than the previous series, has a smaller installation space, and complies with international safety standards, including CE marking and FM non-flammable (optional) certification. In order to easily replace the early controllers, models that require the same panel opening size and depth as the earlier models are also provided.

Delivery: 6-8 weeks

The post Yokogawa YS1700-100/A34 appeared first on Everest Instruments Store.

Yokogawa No. SC72-00-E-AA

Yokogawa Handheld Conductivity Meter.

• Waterproof (IP67), sealed case and connector cover to keep out moisture
• Autoranging allows 0 to 2000 mS/cm capability
• Large, easy-to-read display
• Automatic Temperature Compensation (NaCl curve or User-defined coefficient)
• Self-Diagnostics warn of fault conditions
• Auto power off extends battery life
• 300 Points of Data Memory (stores conductivity value, temperature, date, and time)
• Audio Alarm Function

The post Yokogawa SC72-00-E-AA appeared first on Everest Instruments Store.

Yokogawa No. ZR01A01-02

Yokogawa Cell Assembly.

The post Yokogawa ZR01A01-02 appeared first on Everest Instruments Store.

Yokogawa No. SC42-SP24

Yokogawa Contacting Conductivity Sensor.

The post Yokogawa SC42-SP24 appeared first on Everest Instruments Store.

Rosemount Part no. 389VP-12-54

Rosemount 389/389VP sensors are suitable for use in a wide variety of applications. Reliably measure pH or
oxidation/reduction potential of aqueous solutions in pipelines, open tanks, and ponds. These sensors are
ideal for use in process solutions containing poisoning ions.

Reliability meets robustness.
■ A triple junction reference prolongs sensor life and protects against poisoning ions, such as ammonia, chlorine, cyanides, and sulfides.
■ Enhanced performance and increased life with cracking resistant glass.
■ Available with a glass electrode option for high pH applications.
■ Superior chemical resistance provided by a rugged Tefzel® body with Viton® O-rings.
Ease of installation.
■ The molded sensor body features 1-in. (25,4 mm) MNPT front and rear facing process connections for insertion, submersion,
and flow-through applications.
■ Variopol (VP8) cable connection option, for quick cable-to-sensor release, eliminates cable twisting (Rosemount™ 389VP).
Maintenance made simple.
■ Automatic recognition of pH sensors by Rosemount transmitters: 56, 1056, 1057, and 1066 with integral SMART preamplifier.
■ pH calibration data is stored, which allows sensors to be calibrated in advance for “plug and play” installations in the field.

The post Rosemount Analytical Model 389 pH/ORP Sensor appeared first on Everest Instruments Store.